Note: This command is only available if you are using a "Speck BaduEcoTouch" pump at your Vila. The pump should operate in high occupancy mode when there is a need for a higher flow rate, such as during pool treatments. This mode helps maintain optimal performance while still reducing running costs compared to traditional pumps.
Important: This command only works on your system if your pump has been "smartified" with an EcoTouchController.
Important: This command only works on your system if your pump has been "smartified" with an EcoTouchController.
Overview:
The poolpump highoccupancy command switches the pool pump to a higher speed to accommodate increased usage during peak times.
Command Structure:
poolpump highoccupancy
Details:
- This command increases the pump’s speed for high usage periods, ensuring adequate water circulation during busy times, such as summer days.
- After running at higher speed for 10 minutes, the pump will not revert to low energy mode unless manually adjusted.
- This mode is essential for special situations requiring a higher flow rate, such as during pool treatments.
- The flow rate is increased while still offering a significant reduction in operating costs compared to traditional pumps.
Example:
Vila58 command initiated by @Frank.
Please wait for command results ...
Vila58 command executed. Results: Sending highoccupancy command to device with friendly name containing 'baduecotouch' at IP 192.168.1.238.
{"Mem1":"2"} Command highoccupancy sent successfully to device with friendly name containing 'baduecotouch'.
Vila58: New pump mode (mem1): 2 (High Occupancy).
