Note: This command is only available if you are using a "Speck BaduEcoTouch" pump at your Vila. Running the pump in low-energy mode during normal filtration hours significantly reduces energy costs. The flow rate is calibrated to your pool size and installed heater.
Important: This command only works on your system if your pump has been "smartified" with an EcoTouchController.
Important: This command only works on your system if your pump has been "smartified" with an EcoTouchController.
Overview:
The poolpump lowenergy command configures the pool pump to run in low energy mode, reducing operational costs while maintaining adequate water circulation and filtration.
Command Structure:
poolpump lowenergy
Details:
- This command sets the pool pump to operate in an energy-saving mode after running for 10 minutes in normal mode.
- It ensures lower energy consumption, ideal for maintaining the pool in low-occupancy periods.
- The pump will continue in low-energy mode unless manually adjusted or if high-occupancy conditions demand more power.
- It significantly reduces operational costs during normal filter hours, making it more efficient for long-term usage.
Example:
Vila58 command initiated by @Frank.
Please wait for command results ...
Vila58 command executed. Results: Sending lowenergy command to device with friendly name containing 'baduecotouch' at IP 192.168.1.238.
{"Mem1":"1"} Command lowenergy sent successfully to device with friendly name containing 'baduecotouch'.
Vila58: New pump mode (mem1): 1 (Low Energy).
Vila58 PoolPump_DynamicMonthlyRuntime: Low Energy Mode activated (POWER3).
