Note: This command only works on your system if your pump has been "smartified" with an EcoTouchController.
Overview:
The poolpump on command turns the pool pump on immediately, overriding any inactive state.
Command Structure:
poolpump on
Details:
- This command will start the pool pump immediately, even if it was previously off.
- If a schedule is active, the pump will follow the schedule once turned on.
- If the schedule is disabled, the pump will operate manually and will not adhere to a schedule until it is re-enabled.
- This is particularly useful when manually initiating the pump for cleaning, maintenance purposes, or if you need to heat up your pool as fast as possible.
Example:
Vila58 command initiated by @Frank.
Please wait for command results ...
Vila58 command executed. Results: Sending on command to device with friendly name containing 'poolpump' at IP 192.168.1.244
{"POWER":"ON"} Command on sent successfully to device with friendly name containing 'poolpump'.
Vila58 command executed. Results: Sending on command to device with friendly name containing 'baduecotouch' at IP 192.168.1.238
{"POWER1":"ON"} Command on sent successfully to device with friendly name containing 'baduecotouch'.
Vila58 PoolPump_DynamicMonthlyRuntime: Priming Mode activated (POWER1) - 25 minutes check configured
Starting/Stopping Salt Cell now ... sonoff.0.POOLSALTCELL-SO-BS-1234.POWER Powerstate true
Vila58: Pump power state changed to ON
